Central unit in to the glovebox |
Menu |
Setup |
Handsfree |
The original keyboard and functions |
Remove screws |
Lift ICM-panel shield cover out |
Remove screws |
Pull out and remove electrical connectors |
Remove flat cable, first you must pop up small nails to the both sides |
Remove screws |
Later you will connect a new head unit screen flat cable that connector |
Pull the panel out |
Pull the panel out |
Remove the airbag connector |
Remove the ventilation valve |
Remove carpet |
Open screws |
Open screws |
Remove glovebox flap and electrical connectors |
Open srew and pull out the pipe |
Open srews |
Pull out the glovebox |
Pull the panel out to the upper side and lift it up from below |
Pull the ICM-unit out by pushing from behind |
Remove electrical connectors |
Remove the cover plate handbrake around, notices retaining claws |
Remove screws |
Remove screws |
Lift up the clip and push console to the backwards |
Remove screws |
Remove screws |
Remove electrical connector |
Now you can lift midlle console off |
Remove screws, pull headunit out and remove electrical connectors |
Pull the seal out |
Pull out the A-pillar panel, notice the black bracket |