Remove parts off, part 1

With the player became a good installation instructions. First, I took the battery shoe of. Then remove parts off, red arrows represent the directions, connectors, parts and screws.

Assembly generally takes place in reverse order.

Please be aware that these photos do not replace the installation instructions.
And I do not handle all the installation steps, pictures illustrate only the amount of work and  helping avoid breaking the parts.

Pull the panel out



Pull the panel out

Remove the airbag connector

Remove the ventilation valve



Remove carpet

Open screws

Open screws

Remove glovebox flap and electrical connectors

Open srew and pull out the pipe

Open srews



Pull out the glovebox



 Pull the panel out to the upper side and lift it up from below

 

Pull the ICM-unit out by pushing from behind

Remove electrical connectors





Remove the cover plate handbrake around, notices retaining claws



Remove screws

Remove screws



Lift up the clip and push console to the backwards

Remove screws

Remove screws

Remove electrical connector

Now you can lift midlle console off

Remove screws, pull headunit out and remove electrical connectors

Pull the seal out

Pull out the A-pillar panel, notice the black bracket